Skip to main content

Cleaner, More Efficient Gas Turbines Start with Citrikleen and Citrkleen HD



Cleaner, More Efficient Gas Turbines Start with Citrikleen and Citrkleen HD


 As natural gas becomes a more cost-effective fuel to power America’s power needs, proper maintenance of gas turbines and their compressors is more critical than ever to ensure efficient, effective, profitable, and uninterrupted power production.

The Problem

During the general operation of gas turbines, large quantities of air and other particulates pass through the compressors. While this air is filtered, small quantities of dust, aerosols, and water pass through the filters and end up as deposits on the blades. Over time, these deposits decrease the air flow of the compressor resulting in decreased performance and output of the gas turbines.

The Solution

Citrikleen and Citrikleen HD are concentrated, biodegradable heavy-duty solvents trusted by heavy industry, aerospace, refineries/petrochemical plants and the military to degrease their hardest to clean equipment. Citrikleen and Citrikleen HD’s non-corrosive chemistry make it ideal for use on metals such as aluminum, magnesium, mild steel, cast iron, coper, and cadmium.  

Recommend by maintenance managers and OEMs alike, pairing Citrikleen and Citrikleen HD with your organization's regular maintenance and cleaning of gas turbine compressors has been shown to provide the most effective means of preventing long-term compressor failure. Well executed maintenance and cleaning regimes that incorporate Citrikleen and Citrikleen HD ensure maximum power production, improved fuel efficiency and reduced wear and tear on critical components, including blades and bearings.

Learn More and Order Yours Today


If you’re looking for an efficient, cost effective cleaner to degrease your gas turbines compressors, look no further than West Penetone’s Citrikleen and Citrikleen HD. Learn more about Citrikleen and Citrikleen HD, or order yours today!   
Labels:

Comments

  1. John ClarkApril 14, 2022 at 10:08 PM

    This is excellent information shared by you. This information is meaningful and magnificent for us to increase our knowledge. Also check this out Caterpillar Competitors and Alternatives. Thank you.

    ReplyDelete
  2. Wisconsin Scrub & SweepMay 10, 2022 at 3:11 AM

    Amazing post, thanks for sharing such informative article. Useful and interesting. Take look at this too clarke floor machine parts. Thanks!

    ReplyDelete
  3. Excel Automation LLCAugust 29, 2022 at 9:40 PM

    This comment has been removed by the author.

    ReplyDelete

Post a Comment

Popular posts from this blog

FDA Approved Isopropyl Liquid Hand Sanitizer

FDA Approved Isopropyl Liquid Hand Sanitizer May 9, 2020 In partnership with Zircon Industries, Kelley Industrial Sales has sourced a limited supply of American made, FDA approved isopropyl liquid hand sanitizer. Steri-Touch by Zircon Industries is an FDA approved liquid sanitizer formulated to remove germs and viruses associated with the common cold, flu, and novel coronavirus from hands and other skin surfaces. Intended for industrial and commercial use, Steri-Touch liquid hand sanitizers are available for sale in a gallon, 5-gallon pail, and 55-gallon barrel containers. What is a hand sanitizer and how does it work? A hand sanitizer is defined as a liquid, gel, or foam - typically made up of an alcohol-based chemical blend - that is used to decrease the infectious agents (viruses, germs, other microbes) on a person's hands. Alcohol-based blends often contain a combination of ethanol, n-proponal, or isopropyl alcohol at concentrations ranging from 60-95% alco...
1 comment
Read more

The Hard Facts about Hardfacing

What is Hardfacing? Hardfacing is a metalworking process of applying tougher metals, high-temperature alloys, ceramics and other overlays to base metals to enhance standard wear, corrosion, hardness and other physical and chemical characteristics of the base metal. When to Hardface? Hardfacing can be applied at during all life-cycles of a fabricated or machines part. Commonly, hardfacing is applied On new parts to increase wear On older, worn-down surface back to tolerance On functional equipment to extend the life of fabricated components as part of maintenance program How is the Hardfacing applied? There are a variety of methods to apply hardfacing. No one method is superior to others, rather the method is recommended based on the intended purpose of the hardfacing. Some of the more common welding methods include: Shield Metal Arc Welding (SMAW) Gas Metal Arc Welding (GMAW) Oxyfuel Welding (OFW) Submerged Arc Welding (SAW) Electrical Welding (ESW) P...
Read more